Release film with silicone coating on both sides.
A uni-directional braided glass side anchor bandage, impregnated with a B-stage polyester resin.
Adhesive Nomex® phase insulation. Thermal class F (155°C).
Phase insulation based on PET film, covered on both sides with Nomex® fleece. Thermal class…
Three-layer insulation material based on Nomex®, Kapton® and Nomex®, classified as thermall class C.
PET-Fleece/Mica/polyester foil (Mylar®) Thermal class F (155°C) slot insulation for inverter driven electrical motors
Nomex®/polyester foil (Mylar®)/ Mica/polyester foil (Mylar®) Thermal class F (155°C) mica slot insulation for inverter…
Nomex®/polyester film (Mylar®)/Nomex® Thermal class F (155°C) standard slot insulation
Three-layer insulation material based on PET film with an 80 μm Nomex®, aramid paper layer…
Nomex®/Kapton®/Nomex® Thermal class H (180°C) standard slot insulation
Nomex®/Mica/Nomex® Thermal class H (180°C) mica Slot insulation for inverter driven electrical motors
polyester film (Mylar®)/Mica/polyester film (Mylar®) Thermal class F (155°C) mica slot insulation for inverter driven…
Single-layer aramid paper, thermal class H (180°C).
Single-layer polyester foil (Mylar® A) with good mechanical and electrical properties, thermal class B (130°C).
Custom milled slot wedges with very precise tolerances from different materials.
White slot wedges based on glass /epoxy resin to fixate coils in the slots of…
Glass and polyester resin-based slot wedges with Thermal class F (155°C).
Flat binding cord based on kevlar, for tying of endwindings
Glass roving core covered with braided PET yarn for fixing endwindings. thermal class F (155°C).
Flat binding cord based on artificial silk.
Braided glass cord without filling for fixing coil heads.
Mica paper impregnated with a B-staged epoxy resin, reinforced with a woven glass fabric, faced…
Flexible glass reinforced mica-tape with a PET-Film, thermal class F (155°C) on one side.
Flexible porous glass reinforced mica-tape. Thermal class F (155°C).
Non woven Polyester fleece impregnated with a small amount of epoxy resin
ES-Fleece H consists of a pressed fiberglass mat, backed and faced with a non woven…
Non woven Polyester fleece impregnated with a small amount of carbon-filled epoxy resin.