• Designed to provide test capability for smaller motors quickly and accurately
• With this product line of test systems for AC, DC, synchronous and traction motors a wide range of horsepower and voltage classes can be tested.

Model	MTS100NVD
AC output	Output power
AC output low range tap 1	400 AAC @ 30 VAC
AC output low range tap 2	277 AAC @ 104 VAC
AC output low range tap 3	240 AAC @ 120 VAC
AC output low range tap 4	120 AAC @ 240 VAC
AC output low range tap 5	100 AAC @ 288 VAC
AC output high range tap 1	400 AAC @ 60 VAC
AC output high range tap 2	277 AAC @ 208 VAC
AC output high range tap 3	240 AAC @ 240 VAC
AC output high range tap 4	120 AAC @ 480 VAC
AC output high range tap 5	100 AAC @ 575 VAC
Duty cycle	1 hour on / 1 hour off at 100 kVA, 2 min. at 200%
DC Armature supply output	Output power
DC output low range tap 1	100 ADC @ 40 VDC
DC output low range tap 2	100 ADC @ 140 VDC
DC output low range tap 3	100 ADC @ 160 VDC
DC output low range tap 4	100 ADC @ 320 VDC
DC output low range tap 5	100 ADC @ 375 VDC
DC output high range tap 1	100 ADC @ 80 VDC
DC output high range tap 2	100 ADC @ 280 VDC
DC output high range tap 3	100 ADC @ 320 VDC
DC output high range tap 4	100 ADC @ 640 VDC
DC output high range tap 5	100 ADC @ 750 VDC
DC Field supply output	10 ADC @ 0-300 VDC

Length	1118 mm
Width	787 mm
Height	1397 mm
Weight	635 kg

• Tapped, non-variable AC and armature outputs to start and run AC or DC motors
• Complete instrumentation is provided for precise measurement of electrical characteristics of motors under test (3-phase metering, VM, CM, WATT, VARS, KVA, POWER FACTOR). All meters are 4-digit LCD display and accuracy +/-1.0% Full Scale.
• USB Output Metering Interface to customer supplied compatible computer. Includes Windows based test software.
• Variable field supply
• Fused input power protection
• On / Off pushbuttons with indicator
• Flashing red warning lamp
• Thermal overload protection on main transformer
• Manual tap selector switch
• AC/DC output selector switch
• 15’ (4.5 m) output cables with storage hook
• Operation/maintenance manual

Model	MTSR100R-75	MTS200R-150
AC motor test capacity under load	100 HP	200 HP
AC motor test capacity under no load	500 HP	1000 HP
DC motor test capacity under load	90 HP	180 HP
DC motor test capacity under no load	360 HP	720 HP
AC output voltage tap 1	400 AAC @ 0-120 VAC	400 AAC @ 0-120 VAC
AC output voltage tap 2	240 AAC @ 0-240 VAC	400 AAC @ 0-240 VAC
AC output voltage tap 3	120 AAC @ 0-480 VAC	240 AAC @ 0-480 VAC
AC output voltage tap 4	96 AAC @ 0-600 VAC	192 AAC @ 0-600 VAC
DC Armature output voltage tap 1	300 ADC @ 0-125 VDC	400 ADC @ 0-125 VDC
DC Armature output voltage tap 2	300A DC @ 0-250 VDC	400 ADC @ 0-250 VDC
DC Armature output voltage tap 3	125 ADC @ 0-550 VDC	270 ADC @ 0-550 VDC
DC Field supply	10 ADC @ 0-300 VDC	10 ADC @ 0-300 VDC
Duty cycle	1 hour ON / 1 hour OFF at 100% of rated kVA 2 minutes at 200% of rated AC current (inrush current)	1 hour ON / 1 hour OFF at 100% of rated kVA 2 minutes at 200% of rated AC current (inrush current)
Length	1730 mm	1730 mm
Width	1321 mm	1321 mm
Height	1880 mm	1880 mm
Weight	1452 kg	1905 kg

• The AC supply includes four output voltage taps. The output on each tap is continuously adjustable from near zero to 100% of tap rating.
• The DC armature and field supplies are adjustable from near zero to 100% of rating.
• Complete instrumentation is provided for precise measurement of electrical characteristics of motors under test (3-phase metering, VM, CM, WATT, VARS, KVA, Power factor). All meters are 4-digit LCD display and accuracy +/-1.0% full scale.
• USB output metering interface to customer supplied compatible computer. Includes Windows based test software.
• Non-Contact Tachometer (RPM Meter)
• Main circuit breaker, transient protection, output overload detection circuits, zero start interlock and ground fault detection are standard features.
• The cabinet is provisioned for lifting via forklift or crane.
• Each unit is equipped with a flashing red lamp when output is energized, external interlock and warning circuit provisions
• Jacks for twist-lock plugs are used on the AC and DC armature supplies with 15’ (4.5 m) output cables.
• Operation/maintenance manual

Werkelijke specificaties kunnen afwijken van de op deze website vermelde specificaties. Aan de op deze website vermelde specificaties kunnen geen rechten worden ontleend.