Productomschrijving

Our magnet wires are distinguished according to the following main groups:

Enamelled copper wires (magnet wire)

• RUPOL – easy to solder
• RUPEX – highly heat resistant, non-solderable
• RUTHERM – selfbonding wire

Triple insulated wires with reinforced insulation (IEC 60950 / IEC 61558)

• RUPATEX, class B
• RUPATEX, class F
• RUPATEX, class F med

product	Enamelled copper wire, solderable
description	RUPOL® V 155	The RUPOL® 180	RUPOL® 155 V / NY
Temperature index	155°C	180°C	155°C
IEC	60 317-20	60 317-51	60 317-21
DIN	16 464 Part 2
NEMA	MW 79	MW 82	MW 80
enamel insulation	against. polyurethane	against. polyurethane	Polyurethane + Polyamide
Dimensions	0,02 – 2,0 mm	0,02 – 2,0 mm	0,02 – 1,6 mm
Special features	solderable at 375 ° C without prior stripping, good winding capability.	solderable at 375 ° C without prior stripping, good winding capability.	solderable at 390 ° C without prior stripping, good winding capability.
Special versions	2% – 5% tolerance of the ohmic value for symmetry windings

product	Enamelled copper wire high temperature resistant
description	RUPEX® WV 180	In RUPEX® 210	In RUPEX® 240
Temperature index	180°C	210°C	240°C
IEC	60 317-23	60 317-13	60 317-7
DIN	464 16 Part 5	16 464 Part 7
NEMA	MW 77	MW 35	MW 16
enamel insulation	Polyesterimid	Theic-mod. Polyesterimid + Polyamidimid	polyimide
Dimensions	0,02 – 6,0 mm	0,02 – 6,0 mm	0,0124 – 2,8 mm
Special features	solderable at 450 ° C without prior stripping, good winding capability	high mechanical resistance	very good thermal and chemical resistance

product	Bonding wire
description	RUTHERM® VB 155	RUTHERM® VB 180
Temperature index	155°C	180°C
IEC	60 317-35	60 317-36
DIN
NEMA
enamel insulation	Primer: mod. polyurethane Bonding wire: polyvinyl butyral	Primer: THEIC-on. polyesterimide Bonding wire: polyamide
Dimensions	0,02 – 0,50 mm	0,02 – 1,0 mm
Special features	easy curing, Preparation of windings without reel body	high thermal resistance of the base coat. Preparation of windings without reel body
Special versions	Baked enamel thermoset on request

Technical and economic benefits:

• Tinned by solder dipping, mechanical stripping
• Insulation between primary and secondary winding not required
• Creepage and leakage distances are included
• Considerably faster winding time
• Small quantities available

Construction:

• tinned copper wires (0,2 – 1,0mm, AWG 14-24)
• Other diameters available on request

Dimensions	Outer diameter	Artikel-Nr.
		class B	class F
0,10 mm / 38 AWG	0,30 mm	80-0001	85-0019
0,12 mm / 36 AWG	0,32 mm	80-0002	85-0020
0,14 mm / 35 AWG	0,34 mm	80-0003	85-0021
0,15 mm	0,35 mm	80-0004	85-0022
0,16 mm/ 34 AWG	0,36 mm	80-0005	85-0023
0,18 mm / 33 AWG	0,38 mm	80-0006	85-0024
0,20 mm / 32 AWG	0,40 mm	80-0007	85-0001
0,22 mm / 31 AWG	0,42 mm	80-0008	85-0025
0,24 mm	0,44 mm	80-0009	85-0026
0,25 mm / 30 AWG	0,45 mm	80-0010	85-0002
0,28 mm / 29 AWG	0,48 mm	80-0011	85-0027
0,30 mm	0,50 mm	80-0012	85-0003
0,32 mm / 28 AWG	0,52 mm	80-0013	85-0004
0,35 mm / 27 AWG	0,55 mm	80-0014	85-0005
0,40 mm / 26 AWG	0,60 mm	80-0015	85-0006
0,45 mm / 25 AWG	0,65 mm	80-0016	85-0007
0,50 mm / 24 AWG	0,70 mm	80-0017	85-0008
0,55 mm	0,75 mm	80-0018	85-0009
0,60 mm	0,80 mm	80-0019	85-0010
0,65 mm	0,85 mm	80-0020	85-0011
0,70 mm / 21 AWG	0,90 mm	80-0021	85-0012
0,75 mm	0,95 mm	80-0022	85-0013
0,80 mm / 20 AWG	1,00 mm	80-0023	85-0014
0,85 mm	1,05 mm	80-0024	85-0015
0,90 mm / 19 AWG	1,10 mm	80-0025	85-0016
1,00 mm / 18 AWG	1,20 mm	80-0026	85-0017

Werkelijke specificaties kunnen afwijken van de op deze website vermelde specificaties. Aan de op deze website vermelde specificaties kunnen geen rechten worden ontleend.